Mounting and cutout
- Dimensions
- 24.3 × 100 × 80 mm
- Weight
- Approximately 120 g
- Installation
- 35 mm DIN rail
RP20C-ECT
RP20C-ECT EtherCAT Remote I/O Coupler
The Kinco RP20C-ECT is an EtherCAT remote-I/O coupler with two RJ45 ports, a 100 Mbps fieldbus, 100 m maximum station distance and support for up to 16 RP20 expansion modules. The official page lists DC-Sync and SM-Sync update modes. Exact modules, power budget, cycle setup and availability are confirmed at RFQ.
- Fieldbus
- EtherCAT · 100 Mbps
- Bus ports
- 2 × RJ45
- Expansion
- Up to 16 modules
- Mounting
- 35 mm DIN rail
Lead time confirmed within 1 business day
1business day first reply
Replacement and compatibility
Protocols and drivers
- Fieldbus
- EtherCAT
Specifications
14 fields from the manufacturer datasheet. Blanks are left blank.
| Module Type | Remote I/O coupler |
|---|---|
| Fieldbus | EtherCAT |
| Bus Interfaces | 2 × RJ45 |
| Bus Rate | 100 Mbps |
| Maximum Station Distance | 100 m |
| K Bus Rate | 100 Mbps |
| Expansion Capacity | Up to 16 RP20 expansion modules |
| Update Modes | DC-Sync and SM-Sync |
| Minimum Dc Sync Cycle | 1 ms |
| Io Update With 16 Modules | 60 µs |
| Dimensions | 24.3 × 100 × 80 mm |
| Weight | Approximately 120 g |
| Installation | 35 mm DIN rail |
| Protection Level | IP20 |
| Model number | RP20C-ECT |
|---|---|
| Brand | Kinco |
| Category | PLC Controllers |
| Availability | Availability confirmed at RFQ |
Frequently asked
What network does the Kinco RP20C-ECT coupler use?
The official product table identifies RP20C-ECT as an EtherCAT coupler with two RJ45 ports and a 100 Mbps bus rate.
How many RP20 modules can the RP20C-ECT support?
The official product table states that one RP20C-ECT coupler supports up to 16 RP20 expansion modules. The final I/O mix and power budget are confirmed during engineering review.
Can RP20C-ECT replace a Siemens ET 200SP interface module?
RP20C-ECT may be evaluated as a candidate replacement, subject to engineering review of the fieldbus architecture, I/O mix, wiring, diagnostics, cycle time and software changes.
Request quotation
Send the application, quantity and target date. We will check fit and availability.
What we check
We check the program, I/O, protocols and interlocks before selecting the RP20C-ECT.
RP20C-ECT is the current official model name
the former site label RP20-ETC was incorrect
The coupler does not define the final I/O mix by itself
module count, terminal power and cycle time remain subject to engineering review
Availability, lead time, price and warranty are confirmed at RFQ
A line-by-line BOM review checks the whole list against the application before it becomes an order.