USR AVAILABILITY AT RFQ

USR-CAN115

Name: USR-CAN115 Converter
Brand: USR
SKU: USR-CAN115

USR-CAN115 Converter

BOM & application review — reply in 1 business day

The USR-CAN115 is a DIN-rail Ethernet-to-CAN converter with one 10/100 Mbps RJ45 port and one CAN interface. Its official manual lists CAN 2.0A/2.0B at 5 Kbps–1 Mbps, TCP server/client and UDP server/client operation, three conversion modes, 14 filter groups, 5–24 VDC input, and -40 to +85 °C operation. Network and CAN mapping remain subject to engineering review.

Application evidence

Planning an application with this component?Our engineers will review your architecture and confirm where the USR-CAN115 fits — before you commit.

USR-CAN115 Product image on request

Specifications

USR-CAN115 specifications
Key specifications
Model	USR-CAN115
Ethernet Interface	1 × RJ45, 10/100 Mbps, auto MDI/MDIX
Can Interface	1 × CAN, push-type terminal
Can Standard	CAN 2.0A / CAN 2.0B
Can Baud Rate	5 Kbps–1 Mbps, custom baud supported
Network Modes	TCP server; TCP client; UDP server; UDP client
Conversion Modes	transparent; transparent with ID; standard protocol
Frame Support	standard and extended CAN frames
Frame Filtering	standard-frame only, remote-frame only, or custom input frame IDs; up to 14 groups
Conversion Direction	bidirectional; Ethernet-to-CAN only; CAN-to-Ethernet only
Can Work Modes	normal; loopback; listen-only
Heartbeat	network heartbeat and CAN-port heartbeat packets
Registration Packet	custom or MAC registration; connection-send, data-carrying, and full-registration options
Power Input	5–24 VDC; 12 VDC 1 A recommended; reverse-polarity protection
Dimensions	74 × 24 × 22 mm, excluding terminals
Mounting	DIN rail
Termination	built-in 120 Ω CAN termination resistor
Operating Temperature	-40 to +85 °C
Storage Temperature	-40 to +105 °C
Humidity	5%–95% RH, non-condensing
Watchdog	hardware watchdog
Esd Protection	8 kV air discharge; 6 kV contact discharge
Eft Protection	2 kV power circuit; 1 kV Ethernet and CAN circuits
Surge Protection	power circuit 1 kV differential / 2 kV common mode; CAN circuit 2 kV common mode; Ethernet circuit 1 kV
Commercial
Model number	USR-CAN115
Brand	USR
Category	Communication Modules
Availability	Confirm availability at RFQ

Key specifications

ModelUSR-CAN115

Ethernet Interface1 × RJ45, 10/100 Mbps, auto MDI/MDIX

Can Interface1 × CAN, push-type terminal

Can StandardCAN 2.0A / CAN 2.0B

Can Baud Rate5 Kbps–1 Mbps, custom baud supported

Network ModesTCP server; TCP client; UDP server; UDP client

Conversion Modestransparent; transparent with ID; standard protocol

Frame Supportstandard and extended CAN frames

Frame Filteringstandard-frame only, remote-frame only, or custom input frame IDs; up to 14 groups

Conversion Directionbidirectional; Ethernet-to-CAN only; CAN-to-Ethernet only

Can Work Modesnormal; loopback; listen-only

Heartbeatnetwork heartbeat and CAN-port heartbeat packets

Registration Packetcustom or MAC registration; connection-send, data-carrying, and full-registration options

Power Input5–24 VDC; 12 VDC 1 A recommended; reverse-polarity protection

Dimensions74 × 24 × 22 mm, excluding terminals

MountingDIN rail

Terminationbuilt-in 120 Ω CAN termination resistor

Operating Temperature-40 to +85 °C

Storage Temperature-40 to +105 °C

Humidity5%–95% RH, non-condensing

Watchdoghardware watchdog

Esd Protection8 kV air discharge; 6 kV contact discharge

Eft Protection2 kV power circuit; 1 kV Ethernet and CAN circuits

Surge Protectionpower circuit 1 kV differential / 2 kV common mode; CAN circuit 2 kV common mode; Ethernet circuit 1 kV

Commercial

Model numberUSR-CAN115

BrandUSR

CategoryCommunication Modules

AvailabilityConfirm availability at RFQ

Cross-reference

Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.

Submit a part number for engineering review

Candidate replacements, subject to engineering review. Trademarks belong to their respective owners.

Engineering notes

For the USR-CAN115, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.

The official manual specifies CAN 2.0A/B and does not publish CAN FD support
It lists frame and socket conversion functions but does not claim automatic translation of higher-layer CAN application protocols
PoE and a CAN-port isolation rating are not listed
power, grounding, termination and protocol mapping remain subject to engineering review
Current price, availability, lead time and warranty are confirmed at RFQ

Frequently asked

Which Ethernet and CAN interfaces does the USR-CAN115 provide?

The official manual lists one 10/100 Mbps RJ45 Ethernet port with automatic crossover adaptation and one push-terminal CAN interface supporting CAN 2.0A and CAN 2.0B.

Which network and conversion modes does the USR-CAN115 support?

PUSR lists TCP server, TCP client, UDP server, and UDP client operation, plus transparent, transparent-with-ID, and standard-protocol conversion.

What CAN baud rate and filtering does USR-CAN115 support?

The official manual lists 5 Kbps to 1 Mbps CAN baud with custom baud support, standard and extended frames, and up to 14 custom input frame-ID filter groups.

Can USR-CAN115 replace another Ethernet-to-CAN converter?

USR-CAN115 may be evaluated as a candidate replacement, subject to engineering review of Ethernet modes, frame handling, power, termination, grounding, environment, and higher-layer protocol requirements.

Request engineering review

Have us review the USR-CAN115 for your application

Send the exact application, quantity and target date for a candidate BOM and availability check, subject to engineering review.