Mounting and cutout
- Dimensions
- 74 × 24 × 22 mm, excluding terminals
- Mounting
- DIN rail
USR-CAN114
USR-CAN114 Converter
The USR-CAN114 is a DIN-rail RS485-to-CAN converter for bidirectional communication between one RS485 port and one CAN interface. Its official specification lists CAN 2.0A/2.0B, 5 Kbps–1 Mbps CAN baud, 600 bps–230.4 Kbps serial baud, five conversion modes, 14 filter groups, 5–24 VDC input, and -40 to +85 °C operation. Selection and availability are confirmed at RFQ.
- Serial interface
- 1 × RS485
- CAN support
- CAN 2.0A/B · 5 Kbps–1 Mbps
- Conversion modes
- 5 modes · 14 filter groups
- Power and temperature
- 5–24 VDC · -40 to +85 °C
Lead time confirmed within 1 business day
1business day first reply
Replacement and compatibility
Protocols and drivers
- Serial Interface
- 1 × RS485, push-type terminal
- Can Interface
- 1 × CAN, push-type terminal
- Can Standard
- CAN 2.0A / CAN 2.0B
- Can Baud Rate
- 5 Kbps–1 Mbps, custom baud supported
| Model | USR-CAN114 |
|---|---|
| Serial Interface | 1 × RS485, push-type terminal |
| Can Interface | 1 × CAN, push-type terminal |
| Can Standard | CAN 2.0A / CAN 2.0B |
| Can Baud Rate | 5 Kbps–1 Mbps, custom baud supported |
| Serial Baud Rate | 600 bps–230.4 Kbps |
| Serial Format | 7 or 8 data bits; 1 or 2 stop bits; supported parity depends on data-bit setting |
| Conversion Modes | transparent; transparent with ID; standard protocol; Modbus RTU; custom frame header/trailer |
| Frame Filtering | standard-frame only, remote-frame only, or custom input frame IDs; up to 14 groups |
| Conversion Direction | bidirectional; serial-to-CAN only; CAN-to-serial only |
| Power Input | 5–24 VDC; 12 VDC 1 A recommended; reverse-polarity protection |
| Dimensions | 74 × 24 × 22 mm, excluding terminals |
| Mounting | DIN rail |
| Termination | built-in 120 Ω CAN termination resistor |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +105 °C |
| Humidity | 5%–95% RH, non-condensing |
| Watchdog | hardware watchdog |
| Emc Protection | GB/T 17626.2-2018 Level 3 class B; GB/T 17626.4-2018 Level 3 class B; GB/T 17626.5-2019 Level 3 class B |
| Model number | USR-CAN114 |
|---|---|
| Brand | USR |
| Category | Communication Modules |
| Availability | Availability confirmed at RFQ |
Frequently asked
What serial and CAN interfaces does the USR-CAN114 provide?
The official PUSR selection table identifies USR-CAN114 as the variant with one RS485 interface and one CAN interface, both using push-type terminal wiring.
What baud rates does the USR-CAN114 support?
The official specification lists a CAN baud range of 5 Kbps to 1 Mbps and a serial baud range of 600 bps to 230.4 Kbps.
Which conversion and filtering modes are available on USR-CAN114?
PUSR lists transparent, transparent-with-ID, standard-protocol, Modbus RTU, and custom frame-header or frame-trailer conversion, plus up to 14 custom frame-ID filter groups.
Request quotation
Send the application, quantity and target date. We will check fit and availability.
What we check
We check the ports, topology, protocol map, timing and management needs before selecting the USR-CAN114.
The official source is a combined USR-CAN114/112 document
the PUSR selection table identifies USR-CAN114 as the RS485 variant
Higher-layer CAN protocols are not identified by the official specification and remain outside this record
Current price, availability, lead time and warranty are confirmed at RFQ
A line-by-line BOM review checks the whole list against the application before it becomes an order.