GCAN AVAILABILITY AT RFQ

CANalyst-II-PRO

Name: CANalyst-II Supreme CAN Analyzer (Pro)
Brand: GCAN
SKU: CANalyst-II-PRO

CANalyst-II Supreme CAN Analyzer (Pro)

BOM & application review — reply in 1 business day

The GCAN CANalyst-II-PRO is a communication module supplied by Automation Liberty with an engineering review of the application, exact model, protocol and selection limits. Availability and certification documents are confirmed during RFQ.

Application evidence

Planning an application with this component?Our engineers will review your architecture and confirm where the CANalyst-II-PRO fits — before you commit.

GCAN CANalyst-II-PRO Communication Modules

Specifications

CANalyst-II-PRO specifications
Key specifications
Can Channels	2 (CAN1, CAN2 fully isolated)
Isolation	Three-terminal full isolation; CAN1-CAN2: 2500V
Baud Rate	10Kbps~1Mbps
Throughput	8500 frames/s per channel; USB 17000 fps combined
Relay	CAN1-CAN2 relay and transparent transmission
Buffer Rx	2500 frames/ch
Temp	-40~85C
Dimensions	104x70x25mm
Protocol	CAN 2.0A/B, J1939, CANopen, DeviceNET, iCAN, custom
Emi	Built-in common mode choke + TVS on each CAN channel
Commercial
Model number	CANalyst-II-PRO
Brand	GCAN
Category	Communication Modules
Availability	Confirm availability at RFQ

Key specifications

Can Channels2 (CAN1, CAN2 fully isolated)

IsolationThree-terminal full isolation; CAN1-CAN2: 2500V

Baud Rate10Kbps~1Mbps

Throughput8500 frames/s per channel; USB 17000 fps combined

RelayCAN1-CAN2 relay and transparent transmission

Buffer Rx2500 frames/ch

Temp-40~85C

Dimensions104x70x25mm

ProtocolCAN 2.0A/B, J1939, CANopen, DeviceNET, iCAN, custom

EmiBuilt-in common mode choke + TVS on each CAN channel

Commercial

Model numberCANalyst-II-PRO

BrandGCAN

CategoryCommunication Modules

AvailabilityConfirm availability at RFQ

Cross-reference

Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.

Submit a part number for engineering review

Candidate replacements, subject to engineering review. Trademarks belong to their respective owners.

Engineering notes

For the CANalyst-II-PRO, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.

Managed-feature parity must be checked against the selected hardware and firmware.
Matching protocol names alone does not establish data mapping, device roles, timing, or failure behavior.
Port media, topology, power, security, and diagnostics require an end-to-end network review.

Frequently asked

What applications is CANalyst-II-PRO intended for?

The product record describes CANalyst-II-PRO as a dual-channel CAN analyzer with independently isolated USB, CAN1, and CAN2 terminals for professional CAN bus analysis.

Which CAN interfaces and protocols are listed for CANalyst-II-PRO?

The specifications list CAN channels as 2 (CAN1, CAN2 fully isolated), protocols as CAN 2.0A/B, J1939, CANopen, DeviceNET, iCAN, custom, and baud rate as 10Kbps~1Mbps.

Can CANalyst-II-PRO replace a product from another brand?

CANalyst-II-PRO may be considered as a candidate replacement — subject to engineering review. The incumbent application and this product's published specifications must be reviewed before selection.

How are availability and lead time for CANalyst-II-PRO confirmed?

Availability and lead time are confirmed at RFQ. Price and warranty terms are also confirmed at RFQ.

Request engineering review