CANalyst-II-STD
CANalyst-II Standard CAN Analyzer
BOM & application review — reply in 1 business day
The GCAN CANalyst-II-STD is a communication module supplied by Automation Liberty with an engineering review of the application, exact model, protocol and selection limits. Availability and certification documents are confirmed during RFQ.
Application evidence
Planning an application with this component?Our engineers will review your architecture and confirm where the CANalyst-II-STD fits — before you commit.
Specifications
| Key specifications | |
| Can Channels | 2 (CAN1, CAN2) |
|---|---|
| Baud Rate | 10Kbps~1Mbps |
| Usb | USB 2.0 |
| Isolation | USB-CAN isolated; CAN1-CAN2 shared ground |
| Throughput | 8000 frames/s per channel |
| Buffer Tx | 1000 frames/ch |
| Buffer Rx | 2000 frames/ch |
| Temp | -20~85C |
| Dimensions | 70x45x24mm |
| Protocol | CAN 2.0A/B, J1939, CANopen, DeviceNET, iCAN |
| Os | Windows XP/7/8/10 (32/64-bit) |
| Commercial | |
| Model number | CANalyst-II-STD |
| Brand | GCAN |
| Category | Communication Modules |
| Availability | Confirm availability at RFQ |
Key specifications
Commercial
Cross-reference
Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.
Submit a part number for engineering reviewCandidate replacements, subject to engineering review. Trademarks belong to their respective owners.
Engineering notes
For the CANalyst-II-STD, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.
- Managed-feature parity must be checked against the selected hardware and firmware.
- Matching protocol names alone does not establish data mapping, device roles, timing, or failure behavior.
- Port media, topology, power, security, and diagnostics require an end-to-end network review.
Frequently asked
What applications is CANalyst-II-STD intended for?
The product record describes CANalyst-II-STD as a dual-channel USB-to-CAN analyzer for CAN bus analysis using USB power and isolated CAN communication.
Which CAN interfaces and protocols are listed for CANalyst-II-STD?
The specifications list CAN channels as 2 (CAN1, CAN2), protocols as CAN 2.0A/B, J1939, CANopen, DeviceNET, iCAN, and baud rate as 10Kbps~1Mbps.
Can CANalyst-II-STD replace a product from another brand?
CANalyst-II-STD may be considered as a candidate replacement — subject to engineering review. The incumbent application and this product's published specifications must be reviewed before selection.
How are availability and lead time for CANalyst-II-STD confirmed?
Availability and lead time are confirmed at RFQ. Price and warranty terms are also confirmed at RFQ.
Request engineering review
Have us review the CANalyst-II-STD for your application
Send the exact application, quantity and target date for a candidate BOM and availability check, subject to engineering review.
