3onedata AVAILABILITY AT RFQ

MC201-F

Name: MC201-F
Brand: 3onedata
SKU: MC201-F

BOM & application review — reply in 1 business day

The 3onedata MC201-F converts one CAN interface to one fiber interface for transparent optical transmission. Its official datasheet lists CAN 2.0A/2.0B, 2.5–1000 Kbps baud, automatic or user-defined baud selection, 2 kVAC CAN isolation, multimode reach up to 2 km or single-mode reach up to 15 km, 5 VDC input, IP40 protection, and -40 to +75 °C operation. Link selection remains subject to engineering review.

Application evidence

Planning an application with this component?Our engineers will review your architecture and confirm where the MC201-F fits — before you commit.

Specifications

MC201-F specifications
Key specifications
Model	MC201-F
Can Interface	1 × CAN, CANH/CANL/GND
Can Standard	CAN 2.0A / CAN 2.0B
Can Baud Rate	2.5–1000 Kbps, automatic detection or user-defined
Can Bus Distance	40 m–10 km, baud-rate dependent
Can Node Capacity	up to 110 concurrently transmitting nodes
Can Isolation	2 kVAC
Termination	optional external 120 Ω termination resistor
Fiber Interface	1 × fiber, SC/ST/FC optional
Fiber Distance	multimode up to 2 km; single-mode up to 15 km
Fiber Wavelength	multimode 1310 nm; single-mode 1310 nm or 1550 nm
Power Input	5 VDC, DC barrel connector
Power Consumption	1.39 W no-load; 1.31 W full-load at 5 VDC
Operating Temperature	-40 to +75 °C
Storage Temperature	-40 to +85 °C
Humidity	5%–95% RH, non-condensing
Protection Rating	IP40
Mounting	wall
Dimensions	69 × 22 × 100 mm
Weight	237 g
Certifications	CE, FCC, RoHS
Warranty	3 years
Commercial
Model number	MC201-F
Brand	3onedata
Category	Communication Modules
Certification	CE · FCC · RoHS
Availability	Confirm availability at RFQ

Key specifications

ModelMC201-F

Can Interface1 × CAN, CANH/CANL/GND

Can StandardCAN 2.0A / CAN 2.0B

Can Baud Rate2.5–1000 Kbps, automatic detection or user-defined

Can Bus Distance40 m–10 km, baud-rate dependent

Can Node Capacityup to 110 concurrently transmitting nodes

Can Isolation2 kVAC

Terminationoptional external 120 Ω termination resistor

Fiber Interface1 × fiber, SC/ST/FC optional

Fiber Distancemultimode up to 2 km; single-mode up to 15 km

Fiber Wavelengthmultimode 1310 nm; single-mode 1310 nm or 1550 nm

Power Input5 VDC, DC barrel connector

Power Consumption1.39 W no-load; 1.31 W full-load at 5 VDC

Operating Temperature-40 to +75 °C

Storage Temperature-40 to +85 °C

Humidity5%–95% RH, non-condensing

Protection RatingIP40

Mountingwall

Dimensions69 × 22 × 100 mm

Weight237 g

CertificationsCE, FCC, RoHS

Warranty3 years

Commercial

Model numberMC201-F

Brand3onedata

CategoryCommunication Modules

CertificationCE · FCC · RoHS

AvailabilityConfirm availability at RFQ

Cross-reference

Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.

Submit a part number for engineering review

Candidate replacements, subject to engineering review. Trademarks belong to their respective owners.

Engineering notes

For the MC201-F, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.

The official PDF for the exact MC201-F order code lists 5 VDC input
no alternate power variant is carried into this record
Different-rate CAN network forwarding is described for devices used in pairs
Connector type, fiber mode, wavelength, optical budget, CAN termination and baud settings remain subject to engineering review
Availability and lead time are confirmed at RFQ

Frequently asked

Which CAN standards and baud rates does MC201-F support?

The official datasheet lists CAN 2.0A and CAN 2.0B with a baud range of 2.5 Kbps to 1000 Kbps and automatic or user-defined baud selection.

How far can MC201-F transmit over fiber?

The datasheet lists multimode fiber transmission up to 2 km and single-mode transmission up to 15 km, with SC, ST, or FC connector options.

What isolation and power input are specified for MC201-F?

MC201-F has 2 kVAC CAN-interface isolation and uses a 5 VDC input through a DC barrel connector.

Can MC201-F replace another CAN-to-fiber converter?

MC201-F may be evaluated as a candidate replacement, subject to engineering review of CAN baud, bus length, node count, termination, isolation, fiber type, connectors, wavelength, distance, and power.

Request engineering review

Have us review the MC201-F for your application

Send the exact application, quantity and target date for a candidate BOM and availability check, subject to engineering review.