IMF208-2F
IMF208-2F
BOM & application review — reply in 1 business day
The 3onedata IMF208-2F converts eight RS-485 ports to two 100 Mbps fiber ports for point-to-point backup or ring redundancy. Its official datasheet lists 0–115200 bps serial baud, 1.5 kVAC isolation, multimode distance up to 2 km or single-mode distance up to 20 km, ring recovery below 20 ms, 12–48 VDC input, IP30 protection, and -10 to +70 °C operation. Selection remains subject to engineering review.
Application evidence
Planning an application with this component?Our engineers will review your architecture and confirm where the IMF208-2F fits — before you commit.
Specifications
| Key specifications | |
| Model | IMF208-2F |
|---|---|
| Serial Ports | 8 × EIA RS-485 |
| Serial Baud Rate | 0–115200 bps |
| Serial Format | 5/6/7/8 data bits; None/Even/Odd/Space/Mark parity; 1/1.5/2 stop bits |
| Serial Isolation | 1.5 kVAC |
| Fiber Ports | 2 × 100 Mbps, ring redundancy |
| Fiber Connectors | SC, ST or FC optional |
| Fiber Distance | multimode up to 2 km; single-mode up to 20 km |
| Published Ring Recovery | less than 20 ms |
| Power Input | 12–48 VDC, non-polarity |
| Power Consumption | 3.7 W no-load; 3.8 W full-load at 24 VDC |
| Operating Temperature | -10 to +70 °C |
| Storage Temperature | -10 to +70 °C |
| Humidity | 5%–95% RH, non-condensing |
| Protection Rating | IP30 |
| Mounting | wall |
| Dimensions | 200 × 35 × 120 mm |
| Weight | 647 g |
| Certifications | CE, FCC, RoHS |
| Warranty | 3 years |
| Commercial | |
| Model number | IMF208-2F |
| Brand | 3onedata |
| Category | Communication Modules |
| Certification | CE · FCC · RoHS |
| Availability | Confirm availability at RFQ |
Key specifications
Commercial
Cross-reference
Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.
Submit a part number for engineering reviewCandidate replacements, subject to engineering review. Trademarks belong to their respective owners.
Engineering notes
For the IMF208-2F, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.
- Connector type, fiber mode, wavelength, optical budget and network topology must be matched to the installed link
- The published recovery time applies to the manufacturer's ring function under its specified conditions
- The official datasheet lists wall mounting only
- Current price, availability, lead time and warranty terms are confirmed at RFQ
Frequently asked
How many serial and fiber ports does IMF208-2F provide?
The official datasheet lists eight EIA RS-485 serial ports and two 100 Mbps fiber ports supporting point-to-point backup or ring redundancy.
What fiber distance and connector options are available for IMF208-2F?
The datasheet lists SC, ST, or FC connector options, multimode transmission up to 2 km, and single-mode transmission up to 20 km.
What power and environmental specifications apply to IMF208-2F?
IMF208-2F uses 12–48 VDC non-polarity input, has IP30 protection, and is specified for -10 to +70 °C operating and storage temperatures.
Can IMF208-2F replace another multi-port RS-485-to-fiber modem?
IMF208-2F may be evaluated as a candidate replacement, subject to engineering review of port count, serial format, isolation, fiber type, connectors, wavelength, distance, topology, power, and mounting.
Request engineering review
Have us review the IMF208-2F for your application
Send the exact application, quantity and target date for a candidate BOM and availability check, subject to engineering review.
