IEM6300-12G
IEM6300-12G
BOM & application review — reply in 1 business day
The 3onedata IEM6300-12G is an embedded managed Gigabit Ethernet switch module with eight 10/100/1000Base-T(X) copper ports and four 1000Base-X SGMII fiber ports. Its official datasheet lists an 8K MAC table, 4 Mbit packet buffer, 24 Gbit/s backplane bandwidth, switching latency below 10 μs, 3.3 VDC input, and -40 to +75 °C operation. Carrier-board and optical integration remain subject to engineering review.
Application evidence
Planning an application with this component?Our engineers will review your architecture and confirm where the IEM6300-12G fits — before you commit.
Specifications
| Key specifications | |
| Model | IEM6300-12G |
|---|---|
| Gigabit Copper Ports | 8 × 10/100/1000Base-T(X) |
| Gigabit Fiber Ports | 4 × 1000Base-X, SGMII |
| Management | CLI, Web, Telnet, SSH, SNMP v1/v2c/v3, RMON |
| Network Functions | IPv6, VLAN, QoS, LACP, DHCP, IGMP Snooping, LLDP, ACL, MEP |
| Redundancy | Ring, STP/RSTP/MSTP |
| Published Ring Recovery | less than 20 ms |
| Forwarding Rate | 148810 pps at 100M; 1488100 pps at Gigabit |
| Mac Table | 8K |
| Packet Buffer | 4 Mbit |
| Backplane Bandwidth | 24 Gbit/s |
| Switch Latency | less than 10 μs |
| Power Input | 3.3 VDC |
| Power Consumption | 2.7 W no-load; 8.4 W full-load, both including DEMO board at 12 VDC |
| Operating Temperature | -40 to +75 °C |
| Storage Temperature | -40 to +85 °C |
| Humidity | 5%–95% RH, non-condensing |
| Mounting | embedded |
| Dimensions | 90 × 10.4 × 72 mm |
| Warranty | 5 years |
| Commercial | |
| Model number | IEM6300-12G |
| Brand | 3onedata |
| Category | Industrial Gateways |
| Availability | Confirm availability at RFQ |
Key specifications
Commercial
Cross-reference
Replacing another brand's component? Submit the part number and our engineers will map a candidate and confirm fit.
Submit a part number for engineering reviewCandidate replacements, subject to engineering review. Trademarks belong to their respective owners.
Engineering notes
For the IEM6300-12G, engineering review covers physical ports, network topology and ring behavior, protocol-bridge mappings, data model, timing, and the required management layer. Any cross-brand proposal is a candidate replacement — subject to engineering review.
- The published 2.7 W and 8.4 W consumption values explicitly include the demonstration board at 12 VDC and are not isolated module-only figures
- The official PDF does not publish a certification field, so certifications remain unstated
- Pin mapping, carrier-board layout, SGMII implementation, optics, thermal design and firmware integration remain subject to engineering review
- Availability and lead time are confirmed at RFQ
Frequently asked
How many copper and fiber ports does IEM6300-12G provide?
The official datasheet lists eight 10/100/1000Base-T(X) copper ports and four 1000Base-X fiber ports using SGMII.
What switching capacity and latency are published for IEM6300-12G?
The datasheet lists a 24 Gbit/s backplane, 4 Mbit packet buffer, 8K MAC table, and switching latency below 10 μs.
What power and temperature specifications apply to IEM6300-12G?
IEM6300-12G uses 3.3 VDC and is specified for -40 to +75 °C operation and -40 to +85 °C storage. Published consumption figures include the demonstration board.
Can IEM6300-12G replace another embedded Gigabit switch module?
IEM6300-12G may be evaluated as a candidate replacement, subject to engineering review of pinout, carrier-board layout, SGMII, optics, power, thermal design, firmware, management features, and dimensions.
Request engineering review
Have us review the IEM6300-12G for your application
Send the exact application, quantity and target date for a candidate BOM and availability check, subject to engineering review.
